Thursday, August 22, 2013

Signing up for a blacksmithing class in Zoar Ohio!

Henry Wadsworth Longfellow. 1807–1882
 
59. The Village Blacksmith
 
UNDER a spreading chestnut tree 
  The village smithy stands; 
The smith, a mighty man is he, 
  With large and sinewy hands; 
And the muscles of his brawny arms         5
  Are strong as iron bands. 
  
His hair is crisp, and black, and long, 
  His face is like the tan; 
His brow is wet with honest sweat, 
  He earns whate'er he can,  10
And looks the whole world in the face, 
  For he owes not any man. 
  
Week in, week out, from morn till night, 
  You can hear his bellows blow; 
You can hear him swing his heavy sledge  15
  With measured beat and slow, 
Like a sexton ringing the village bell, 
  When the evening sun is low. 
  
And children coming home from school 
  Look in at the open door;  20
They love to see the flaming forge, 
  And hear the bellows roar, 
And watch the burning sparks that fly 
  Like chaff from a threshing-floor. 
  
He goes on Sunday to the church,  25
  And sits among his boys; 
He hears the parson pray and preach, 
  He hears his daughter's voice, 
Singing in the village choir, 
  And it makes his heart rejoice.  30
  
It sounds to him like her mother's voice, 
  Singing in Paradise! 
He needs must think of her once more, 
  How in the grave she lies; 
And with his hard, rough hand he wipes  35
  A tear out of his eyes. 
  
Toiling,—rejoicing,—sorrowing, 
  Onward through life he goes; 
Each morning sees some task begin, 
  Each evening sees it close;  40
Something attempted, something done, 
  Has earned a night's repose. 
  
Thanks, thanks to thee, my worthy friend, 
  For the lesson thou hast taught! 
Thus at the flaming forge of life  45
  Our fortunes must be wrought; 
Thus on its sounding anvil shaped 
  Each burning deed and thought!

Wednesday, August 14, 2013

Plumb Hatchet pt.2

The Hatchet in original form.
Sanded and filed.  (unfortunately I used a grinding attachment on my dremel and it left nasty marks all over the blade which I will have to sand off.)
Sharpened with a whetstone, and stropped to a keen edge! Then it was time to test for sharpness.
  Yup.
Also sanded all that nasty red stain off the handle and gave it a dip in some linseed oil.


Tuesday, August 13, 2013

Next!

New project! Found a kid sister for my double bit plumb axe (thank you again, Keith). A plumb victory hatchet. With original handle and leather mask!

Sunday, August 4, 2013

I'm Baaaaaaaaaaaaaack!

And better than ever!
 
 
New Project
 
Ka-Bar/Becker BK-2 "Campanion" Knife
  1. I removed the Abrasive black coating on the blade, using "Klean-rite" paint stripper
     2.  Put a "convex" edge on the blade. This makes it a sturdier "chopper"
Sharpening
 
As a side note, I took the knife to Ithaca and Keith and I put it to the test, chopping and splitting wood. It worked very well!
 
   3. Picked up some Ash from Woodcraft to make new scales
 
 Cut out a rough blank with my scroll saw
And hand carved with my new Mora

 
 
Next I polished the blade until it was almost mirror bright, but it kept rusting on me, so I did a little research and came up with "forced patinas".
 
I soaked the blade in a vinegar damp rag for a few hours and the mottled the blade by smearing it with ketchup, letting it sit for 1/2 hour.
 Cleaned with soap and water, and a quick rub with #0000 steel wool and this is the end result.
 
Just about done. Handle still needs sealed.
 
 
So, Whadda ya think? Not bad for a novice!